Failure at Line 89- Redemption 2.3

[WLJohnson05]

I can't seem to get 2.3 going....It doesn't want to install. I have the .92 hboot. It shows the no space left on device error, and I think it said something about line 89. Any ideas?

Edit:

Here's exactly what shows up>>>>

E:No space left on device
E:Error writing BOOT:
E:Failure at line 89:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.

[Ads]

[tweebee]

The no space device error sounds like an Hboot problem, but I see that you're using .92. We're going to need Doug to chime in on this.

[joshjuniorr]

Oh there was quite a few posts about this on the roms thread over at xda. I didn't catch if they fixed it..although I believe doug was in on it so chances are the solution has been found

Sent from my ADR6300 using Tapatalk

[s197]

I can't seem to get 2.3 going....It doesn't want to install. I have the .92 hboot. It shows the no space left on device error, and I think it said something about line 89. Any ideas?

Edit:

Here's exactly what shows up>>>>

E:No space left on device
E:Error writing BOOT:
E:Failure at line 89:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.

Were you previously on Cyanogen?

[WLJohnson05]

Were you previously on Cyanogen?

nope, redemptive revolution 2.1

[doug piston]

Dev has said to unroot by flashing the PB31IMG then reroot and flash the rom. I have another theroy though.. It would involve reflashing the .92 hboot. Let me know if you interested.

[WLJohnson05]

Dev has said to unroot by flashing the PB31IMG then reroot and flash the rom. I have another theroy though.. It would involve reflashing the .92 hboot. Let me know if you interested.

Naw it's not that serious for me to run 2.3. 2.1 is running smooth and quick, so I'll just wait until his next update or quick fix for this issue to try out something.

[WLJohnson05]

Well after the clockwork updated itself, I figured I would give it a go one more time....same error came up (It takes a while for it to do this though each time...really actually long enough to really load the rom on there usually). It then takes you to your regular menu where you can reboot the phone. I rebooted the phone and at the new startup it loads up the setup screens like it's a fresh phone. Skipped through all that and went to look in the information, and it says that it's lou's 2.3 rom. So maybe this is just a bug in the rom that it does something weird during setup. Either way it installed it and it's running nice and smooth.

[jkhonea]

Well after the clockwork updated itself, I figured I would give it a go one more time....same error came up (It takes a while for it to do this though each time...really actually long enough to really load the rom on there usually). It then takes you to your regular menu where you can reboot the phone. I rebooted the phone and at the new startup it loads up the setup screens like it's a fresh phone. Skipped through all that and went to look in the information, and it says that it's lou's 2.3 rom. So maybe this is just a bug in the rom that it does something weird during setup. Either way it installed it and it's running nice and smooth.

Good deal. I heard one or two other people saying they got the error yet the ROM loaded. Not sure what's up, but glad you got it installed.